![]() Sheet of birch veneered plywood and a 1x4x8′ board for the front trim.This listing is for downloadable digital plans to guide you through the process of building a TV stand - step by step. Once completely assembled, the TV stand was stained with our choice of wood stain. ![]() The front trim pieces were then cut and test fitted for perfect length.Īttached the front trim wood pieces using just wood glue. Then the side slats were assembled onto the TV stand using wood glue and nails. Testing to make sure the wood fits snug into the routed Dado joint.Īfter routing the wood, the top, bottom, and middle slats were attached together with glue and nails. Made 4 joints on the top and bottom pieces of wood for the middle and sides to fit into. Made a Dado Joint 1/4″ deep to hold everything together using a router. Had to purchase more wood besides the scrap to do the job right. Had lots of scrap wood that needed to be used up. See the step by step procedure for making the DIY TV stand below… The entire stand is made out of one 4×8 sheet of birch veneered plywood and a 1x4x8′ board for front trim. The dimensions of the TV stand in total is 58″ Wide x 22″ Tall x 14″ Deep. From start to finish this project will take half a day or longer. Having powered tools for woodworking will help with this project. This project requires basic carpenter woodworking skills. ![]() Here is a simple way to make your own DIY TV stand from wood.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |